An Oiling System Manufacturer Integrating Design, Production And Sales, With Its Own Brand TRIBOS, Has Been Committed To The Development And Production Of Precision Automatic Oiling Devices For Stamping Processing For Many Years
Oiling equipment: Structure and advantages of electrostatic oiling equipment
Vertical electrostatic oiling equipment is a machine designed specifically for applying a very thin layer of lubricant to the surface of metal strips. The accuracy and reliability of this machine make it widely used by the world's leading manufacturers of plated steel and aluminum sheets.
Working principle of electrostatic oiling equipment: Oil is pumped from the storage tank by the nozzle system and atomized into fine particles of micron (one millionth of a meter) in the atomization chamber. It mainly includes three parts:
One, the shell part includes the oil storage tank, nozzle fixed plate and controlled airflow expansion chamber.
Second, the electrostatic charging part which is the part where the ionizer is located. The ionization chamber can be disassembled for easy cleaning and maintenance.
Three, a metal negative high voltage plate is placed on the negative high voltage plate, which can assist in coating the charged oil mist on the strip.
Advantages of vertical electrostatic oiling equipment:
1, Response time improvement: Microprocessor-based PID (proportional, integral, differential) closed-loop controller and variable frequency motor work together to improve response time and operating efficiency by reducing power requirements and improving monitoring capabilities.
2. Simplify operation: Easily enter the required amount of fueling into the process controller without the use of tables and charts. By programming the process controller, you can display your preferred measurement units and use the optional display on the process controller instead of using a pressure gauge to operate the unit. This makes the refueling process easy to monitor, and operation and adjustment can be controlled from one convenient console. At the same time, the high pressure is separated from the main control cabinet which can be placed at a remote location.
3、Reduced maintenance: There are no valves controlled by motors, process controllers are used for troubleshooting, greatly reducing troubleshooting steps, and control systems that use obsolete parts have been eliminated and replaced with popular technology.
4, higher efficiency: by changing from lower limit refueling conditions to upper limit refueling conditions or from upper limit refueling conditions to lower limit refueling conditions, the response time is reduced to 4 seconds, when the speed of the line changes, the system will improve the distribution of the oil layer over the entire length of the strip, the secondary turbine blower works at a much lower speed, thus reducing maintenance costs, saving maintenance costs, reducing noise pollution, static reduction in the number of parts and The application of modern design reduces downtime for maintenance and repair.
The above is to introduce you to the structure and advantages of electrostatic oiling equipment, I hope it will help you!
Aluminum foil oiling can be divided into sheet aluminum foil according to its shape. Most of the raw materials for the deep processing of aluminum foil are supplied in roll form. Only a few manual packaging occasions use aluminum foil. Aluminum foil coating oil can be divided into hard foil and soft foil according to its status. Aluminum foil oiled hard foil: Rolled aluminum foil without softening treatment (annealing) and degreasing treatment has a residual surface.
Aluminum foil coated with oil is a stamping material made of aluminum rolled directly onto a thin sheet. The stamping effect of aluminum foil coated with oil is similar to that of pure silver foil, so it is also called fake silver foil. Due to its softness and ductility, aluminum has a silvery-white luster. Aluminum foil can also be printed if the rolled sheet is mounted on offset paper with sodium silicate and other materials.
Knife beam type electrostatic oiling equipment is oil pump directly on the knife beam, through the tiny gap of the knife beam to spray oil. Because the gap of the knife beam is very small, so the oil purity requirements are very high. In actual production, it is impossible to completely clean the annealed strip or the cleaned strip surface with more or less residual iron powder and dust, which will inevitably cause the knife beam (especially the lower knife beam) to be blocked during the continuous production process, resulting in uneven oiling or leakage on the strip surface. Nozzle type electrostatic oiling equipment uses air pressure to pump oil to the nozzle and then sprays the oil out, so even if there are some tiny impurities in the oil under the pressure of the pump and air, the nozzle will not be clogged. Even if there is slight clogging, the impurities can be blown out of the nozzle by directly increasing the air flow, thus ensuring the quality of oiling.
Today, with the flourishing of science and technology, the help of oiling equipment is indispensable for everything from hot water to security doors, to cars or buildings. It can be said that because of the existence of oiling equipment, it not only saves the time we don't need to waste in our daily life, but also reduces some unnecessary expenses and plays a significant role in the direction of our business. On the contrary, some delays in production or mistakes in details may bring adverse effects to ourselves, so it is still important to grasp this link.
The electrostatic oiling equipment consists of oiling chamber, high voltage electrostatic power supply, oil supply system, oil circuit heating and circulating system, electric control system and operating table. The upper and lower oiling knife beams/nozzles are horizontally installed in the oiling chamber, and the steel plate can pass through freely. The oil supply system quantifies the oil supplied to the oiling knife beam/nozzle to flow evenly from the knife gap of the knife beam and nozzle.
Electrostatic oiling equipment is a device that uses high voltage electrostatic to evenly spray antirust oil or other process media on the surface of the plate and strip. Composition: Electrostatic oiling equipment consists of oiling chamber, high voltage electrostatic power supply, oil supply system, electric control system and operating table.